Using The Water Softener - Proline DWP 1247 WH Manual De Instrucciones

Using the Water Softener
The hardness of the water varies from place to place. If hard water is used in the
dishwasher, deposits will be formed on the utensils. This appliance is equipped with a
water softener which uses a salt specifically designed to eliminate the minerals from the
water.
CAUTION:
• Only use salt specially formulated for domestic dishwashers.
• Do not use table salt as it contains insoluble substances which may damage the water
softening system.
• Fill the salt container before starting the washing programme. In this way, the excess
saline solution will be immediately removed by the water; the prolonged presence of salt
water inside the tank may lead to corrosion.
• If you plan to use dishwasher tablets for your washing needs, then you do not require to
use salt or rinse agent but please note that the refill salt indicator light
remain illuminated on the control panel. This is quite normal and will not affect the
operation of your dishwasher.
Adjusting the salt consumption
1. After the dishwasher is switched on, enter the status of adjusting the salt consumption
by holding down
2. While the indicator light
to suit the water hardness.
•The corresponding washing programme indicator light(s) will illuminate.
3. The setting will be validated automatically after a few seconds if you do not press
again.
until the indicator light
illuminates, repeatedly press
will
illuminates.
to adjust the setting
12