Transport, Storage; Intended Use; Work Safety - S&P TRW Manual De Instrucciones

1. Transport, storage

Please inspect the device upon receipt for proper condition and functioning.
The following information must be checked on receipt and compared with the order:
1. Model
2. Design
3. Technical data
Please store the device in original packaging in a dry place protected from the elements.
Store at a temperature between -10ºC and + 40 ºC.
For transportation of the device, the local security provisions apply in all cases.
Please transport the device in its original packaging.

2. Intended use

The TRW control unit consists of a thermostat valve with remote adjustment and a capillary sensor.
It serves for acclimatization of mass flows for a constant air supply temperature control.
The TRW control unit is suitable for hot water coil.
Technical data:
• Valve body made of red brass, nickel-plated:
• Thermostat adapted with valves with threaded connection
• Maximum operating temperature:
• Maximum flow volume
• Target value range:
• Maximum operating pressure
• Maximum closing pressure
• Length of capillary sensor:
3. Work security
– The operator must ensure that only qualified staff work on the device.
– The necessary activities may only be conducted by staff who are suitable based on their training,
experience and instruction, as well as their knowledge of the relevant norms, provisions, and
regulations for accident prevention and operating conditions.
– The operator must ensure that the device is only employed in proper condition.
– Everyone charged with the assembly, startup, operation and maintenance of the device must
have read and understood the instructions for operation.
– Keep the device free of, e.g., screws, chips or tools.
– Avoid contact with rotating parts.
DN 20 - 3/4"
M30 x 1.5
120 Cº
300l/h
7-28 ºC
10 bar
1 bar
5 m
10