Product Overview - Es Series; Es Series Controls - Raymarine Lighthouse eS Serie Manual Del Usario

2.5 Product overview - eS Series

Your multifunction display includes the features listed
below.
• MultiTouch capable LCD
• Raymarine HybridTouch controls
• NMEA 0183
• NMEA 2000 via SeaTalk
• Bluetooth
• Wi-Fi
• Internal GNSS (GPS / GLONASS) receiver
• Composite Video input
• HDMI video input (Not available on eS7x displays.)
• GA150 GNSS Receiver antenna (Not available
on eS7x displays.)
HybridTouch overview
If your multifunction display features HybridTouch,
this enables you to operate the unit using the
touchscreen and the physical buttons.
A HybridTouch display has physical buttons
which can be used in addition to the touchscreen.
Touchscreen only multifunction displays (which
do not have physical buttons) can be connected
to a remote keypad which allows HybridTouch
functionality.
All functions can be accessed using the touchscreen.
However, there may be situations (such as rough
sea conditions) when it is not appropriate to use
the touchscreen. In these situations, Raymarine
strongly recommends that you activate the touch
lock and use the physical buttons to operate your
multifunction display.
14
D13274-1
ng

2.6 eS Series Controls

1
Description Functions
1 Touch- you can touch the screen to operate
screen many common functions, including all
menu operations.
2 Home Press to return to the Homescreen.
3 Menu Accesses menus. Press again to close
menus.
4 UniControl Provides rotary and joystick control.
5
Ok Ok push button
6 Back Press to return to a previous menu or
dialog level.
7 WPT / MOB • Press and release to access the
waypoint options. Press again to place
a waypoint.
• Press and hold to place a Man
Overboard (MOB) marker at your
current position.
8 Power • Press once to switch the unit ON.
• Once powered on, press the Power
button again to adjust the brightness,
perform a screen capture, access
Powersave mode or access the power
controls for external devices.
• Press and hold to switch the unit OFF.
9 Card reader Open the card door to insert or remove
slot a MicroSD card. There are 2 card slots
(labelled 1 and 2), used for electronic
charts and archiving waypoint, route,
track and settings data.
10 Pilot • Press to disengage integrated
autopilot.
• Press and hold to activate Auto mode
on integrated autopilot.
11 Switch • Press to switch the active pane in
Active Pane splitscreen pages.
• Press and hold to expand the selected
pane to fullscreen.
2 3
11 10 9
D13286-1
eS Series installation instructions
4
5
6
7
8