Problem Solving; The Scoreboard Does Not Light Up When Switched On - Favero Electronics FS2 Manual De Uso

ENGLISH
10. P
ROBLEM SOLVING
This chapter contains information concerning the principal problems that may arise during the Radio Receiver`s
life and is aimed at helping you to quickly resolves such problems. If you encounter a problem that is not
explained here, please contact us by email ([email protected]).

10.1. The scoreboard does not light up when switched on

1) Make sure that the scoreboard is power supplied.
2) Make sure that the scoreboard is correctly connected to the Radio Receiver (check the cable, use an OUT
connector or the IN/OUT connector if SW2 is OFF).
3) Make sure that the Radio Receiver is power supplied; check that the internal red LED is blinking (see chapter
8).
10.2. The connected scoreboards show the time of the day on the chronometer display
The scoreboard shows the time on the chronometer display when the Radio Receiver does not receive any data
from the control console or when the control console is set to show only the time.
1) Make sure that the control console is switched on.
2) Make sure that the control console is not configured to show only the time.
3) Check the wireless connection (see paragraph 5.3).
4) Repeat the linking procedure of the Radio Receiver to the Console (paragraph 5.2).
10.3. The scoreboard displays data that do not correspond to the data of the Console
The Radio Receiver has been linked/connected to another Console by mistake.
1) Repeat the linking procedure of the Receiver to the Console (paragraph 5.2).
10.4. The scoreboards display the data in a discontinuous way (with wireless connection)
There may be interference due to other radio devices.
1) Eliminate any obstacles (metallic structures, persons, equipment, etc.) between the Console and the Radio
Receiver.
2) Try bringing the Command Console closer to the Radio Receiver
3) Follow the indications given in the control console User Manual on wireless communication between the
console and the scoreboards.
4) Try using a cable connection (see chapter 6.2).
00265-M01-04 - FS2 Radio Receiver Installation Manual
8 / 36 F E S
AVERO LECTRONICS RL