Cleaning The Glass Panels - Lynx 4HT-429 X Instrucciones De Uso

How to program
Cleaning the glass
panels
24
Set the function control knob to clean.
The indicator panel will show level 2 and 1 hour. You
can change the level with the temperature control
knob.
When the cleaning process has finished, the oven will
switch off automatically. You will hear a high pitch
sound. Set the function control knob to position 0.
The glass panels on the oven carriage can be
removed to assist in cleaning.
1.
Slide out the oven carriage.
2.
Unscrew the cover at the top of the oven carriage.
Turn the screws clockwise or anti clockwise with a
coin to do this. (Fig. A)
3.
Hold the glass panels on the left and right and slide
them upwards. (Fig. B)
Lay it on a cloth with the handle underneath.
The inner glass panel with the hanging hook
remains on the oven carriage.
Clean the glass panels with glass cleaner and a soft
cloth.
4.
Insert the panels into the mounting on the oven
carriage again.
5.
Replace the cover and screw it back on. If the
cover cannot be screwed on, check whether the
panel is seated correctly in the mounting.
6.
Close the oven carriage again.
The oven must not be used again until the panels
have been correctly installed.