Maintenance Advice - TUBES EVE Manual De Uso

• Identify Device
NB: this can only be used via the
TUBES Plug&Play App.
This feature allows you to locate a devi-
ce when lost or to identify a specific de-
vice when it is placed in a room where
there is more than one device remotely
programmed via the TUBES Plug&Play
app.
By enabling this feature, the device can
be recognised because it emits 4 beeps
and the two LEDs flash simultaneously.
To use this feature with the app, click
the extra features icon at top right and
select "Identify Device".
RESET
This procedure resets the temperature,
weekly programming, open window
detection and metering of the minutes
before changing the filter to the default
settings. Additionally, the Wi-Fi settings
are reset (procedure required if you
want to connect the device to a diffe-
rent network).
To reset the device to factory settings,
you must unplug it and plug it back in
again. Immediately after plugging it
back in again, as soon as the two LEDs
light up, touch both touch controls at
the same time for at least 10 seconds.
You will then hear 5 beeps, signalling
that the reset procedure has begun.
(This is the same procedure as the one
performed to enable/disable Wi-Fi con-
nection; however, you need to ignore
the beep you will hear after 5 seconds,
and keep touching the controls for at
least 10 seconds.)
During the reset, both the MODE and
the ON/OFF controls
- alternating - a WHITE FLASHING light.
When the reset has ended, a single
beep signals that the operation has
been completed.
cod. MAN#EVE - Luglio/July 2019
controls emit
NB: to reset the setting, the Eve Wi-Fi
must be turned on. If the Wi-Fi is not
turned on, it will not be possible to reset
Eve.
MALFUNCTIONS
In the event of malfunctions, the touch
control LEDs will flash. The following
malfunctions are possible:
Overturn Alarm
If the device is accidentally knocked
over and overturned, ventilation and
heating are temporarily turned off. The
MODE control signals the anomaly
with a FLASHING WHITE light.
When it is returned to the correct posi-
tion, the device goes back to the mode
in which it was operating before being
overturned.
NTC Alarm
If the device detects a temperature pro-
be malfunction, heating is temporarily
turned off. Ventilation on the contrary
remains on for two minutes and then
the top is automatically lowered and
the device switches off.
The two LEDs emit synchronised FLA-
SHING DARK RED lights. This alarm
indicates a temperature probe malfun-
ction. Please contact the Tubes Techni-
cal Service.

MAINTENANCE ADVICE

Before carrying out any maintenance,
switch off the appliance. The choice of
the best materials and the quality of
the double surface treatment protect
the Tubes radiator against corrosion
and impact. Simple maintenance ensu-
res long life of the appliance. The fol-
lowing suggestions are recommended:
Clean the outside walls of the radia-
•
tor, preferably using a damp cloth.
DO NOT use abrasive or corrosive
•
products.
17