Noise And Vibration Information - Mannesmann 12862 Manual De Instrucciones

Technical dates
Voltage
Nominal power
No-load speed
Max. groove depth
Groove width
Swivelling range
Router diameter
Router bore diameter
Sound pressure level (LPA)
Sound power level (LWA)
Vibration
Protection class
Always wear ear-protection during your work!

Noise and vibration information

Measured values determined according EN 60745
- The vibration emission level given in this information sheet has been measured in
accordance with a standardized test given in EN 60745 and may be used to compare one
tool with another.
- The given vibration emission level may be used for the initial estimation of the real exposure.
- The vibration emission level will vary because of the ways in which a power tool can be used
and may increase above the level given in this information sheet.
-
Try to keep the exposure as low as possible. To reduce the vibration emission level the user
should wear working-gloves and use the machine for limited time.
-
All parts of working cycles have to be considered (including the time the power tool is
switched off, and the time, when the power tool is running under no-load condition).
Selecting size of biscuit dowels
The size of the biscuit dowels depends on the thickness of the material.
If the material is thicker than 25 mm, two biscuit dowels may be used on top of each other.
The most popular sizes of biscuit dowels are listed below. The cutting-depth depends on the
size of the biscuit dowels
material- dowel-
thickness size
8-12 mm 0
12-15 mm 10
> 15 mm 20
230 V~ / 50 Hz
900 W
12.000 min
19 mm
3,5 mm
0-135°
100 mm
22 mm
92 dB(A)
103 dB(A)
2,6 m/s²
/ II
cutting-
measures depth
47x15x4 mm 8,0 mm
53x19x4 mm 10,0 mm
56x23x4 mm 12,3 mm
-1
GB - 9