Remote Control; Technical Data - Beper VE.510 Manual De Instrucciones

Mist Fan Use instructions

REMOTE CONTROL

In order to use the remote control for the first time, remove the battery case cover and place the batteries (2 *
AAA not included) by following the correct polarity, and place the cover back on. Follow the same procedure to
replace the batteries when they are exhausted.
OPERATION BY REMOTE CONTROL:
The remote control allows the selection and setting of all the functions described in paragraph "OPERATION BY
CONTROL PANEL".
Furthermore, using the remote control allows to select and activate all the different operation mode, by pressing
the MODE button.
The fan is fitted with 3 different operation modes:
NORMAL: The blade rotates continuously.
NATURE: The blade has an alternating or wavy motion (the blade rotates with a certain speed, then slows down
to almost complete stop, then resumes initial speed, and so on).
SLEEP: The blade rotates with a slower speed than the previous ones.
The blue LED lights up on the control panel indicating the selected mode.
HEAD INCLINATION
It is possible to regulate the tilt angle of the fan head, allowing you to change the airflow direction.
Turn the fan off before regulating the tilt angle.
Hold the motor unit and bend the fan head into the desired position.
Caution: Do not force the movement to prevent the mechanism from breaking.
CLEANING
Before performing any cleaning, turn off the fan and disconnect the plug from the power outlet. To clean the fan,
use a soft, slightly damp cloth. Do not use alcohol or chemicals such as diluents, abrasive products in general.
Empty the tank completely and rinse it in order to avoid the formation of limestone, odor and mold.
Dry all washed / cleaned parts thoroughly before switching on the fan.

TECHNICAL DATA

Power: 75W
Power supply: 220V-50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
12