Safe Installation; Instructions For The Electrical Connection; Tools; Preparing The Appliance - Gaggenau DV061100 Instrucciones De Montaje

en Safe installation
Installation in the fitted unit
Note the safety clearances for installing in the fitted
unit.

Safe installation

Follow these safety instructions when in-
stalling the appliance.
WARNING ‒ Risk of suffocation!
Children may put packaging material over
their heads or wrap themselves up in it
and suffocate.
Keep packaging material away from
▶
children.
Do not let children play with packaging
▶
material.
WARNING ‒ Risk of electric shock!
If the insulation of the power cord is dam-
aged, this is dangerous.
Never let the power cord come into
▶
contact with hot appliance parts or heat
sources.
Never let the power cord come into
▶
contact with sharp points or edges.
Never kink, crush or modify the power
▶
cord.
Instructions for the electrical
connection
In order to safely connect the appliance to the elec-
trical system, follow these instructions.
The appliance must only be connected to a protect-
¡
ive contact socket that has been correctly installed.
Only a qualified electrician may install a socket or
replace the connecting cable, taking the appropriate
regulations into account.
10
The appliance must only be connected with the
¡
power cable provided. Connect the power cable to
the back of the appliance.
Connecting cables with various plug types are avail-
¡
able from after-sales service.
No multi-plugs, multiple connectors or extension
¡
leads must be used. Overloading causes a risk of
fire.
If the plug can no longer be reached after the in-
¡
stallation, a partition must be provided in the phases
in the permanent electrical installation in accord-
ance with the installation regulations.

Tools

You require the following tools for the installation.
Measuring tape
¡
Calliper
¡
Pencil
¡
Angle bracket
¡
Torx 20 screwdriver
¡
Large flat-tipped screwdriver
¡
Medium-sized flat-tipped screwdriver
¡
Combination pliers
¡
Cordless combination drill
¡
Drill, 4/5/6.5/10 diameter
¡
Countersink
¡

Preparing the appliance

A pump that contains oil is installed in the appliance. If
the incline is too great, this oil may flow out of the
pump. Do not tip the appliance or upend it.
ATTENTION!
The oil from the vacuum pump may leak out when it is
tipped or tilted, and may damage the appliance.
Do not move the appliance if the transport locks for
▶
the pump are not installed.
When uninstalling the appliance, secure the trans-
▶
port locks again before moving the appliance.
Requirement: Use a suitable tool to remove the trans-
port locks and install the oil filter.
Carefully lift the appliance out of the packaging.
1.