Radio Operation - Manta SPK614 Manual De Usuario

RADIO OPERATION

TUNING TO A RADIO STATION
1. Press the FUNCTION/ /LIGHT button on unit to select the FM FUNCTION.
2. Press the /+10/TUN.+ button or
the display. Example: FM 87.80 MHz. If the radio receive Stereo signal, "ST" indicator will show on the display.
3. Press the or button to increase and decrease volume to a comfortable level.
4. Extend FM ANTENNA to its full length and gently move the unit back and forth to get the best reception, or place
the unit in an open location.
AUTO PRESET MEMORY / SCAN
To search for and automatically save stations to preset memory, press and hold the
Any station with a strong enough signal will be saved to preset memory. After the unit is finished scanning, the
unit will automatically tune to preset station number 1 (P01). To tune to the next preset station, press and hold the
/+10/TUN.+ button on unit. To tune to the previous station, press and hold the
MANUAL PRESET MEMORY OPERATION
You may choose stations to save in preset memory so that you can tune directly to these stations quickly.
1. Press the /+10/TUN.+ button or
as a preset.
2. Press and hold the EQ/P-MODE button, "P01" will flash on the display to indicate that you are saving the station as
preset memory 01, to change the preset memory sequence, press and hold the
TUN.- button. Then press and hold the EQ/P-MODE button again to enter.
3. To save another station, repeat steps (1) & (2). You may save up to 30 FM stations.
To tune to preset stations, press and hold the
USB CHARGING
This unit provides a 5V 1A USB charging port for charging your smart phone. Connect the USB cable of your smart
phone to the USB CHARGE port for charging.
USB OPERATION
This unit provides one USB port for music playback.
1. Press the FUNCTION/ /Light button on unit to select USB mode.
2. Plug the USB memory stick to the USB port on top of the unit. Playback will start automatically from Track 1.
3. To pause playback, press the
4. To resume playback, press the
5. To select a desired track, press the
appears on the display. The unit will start play automatically.
6. To search for a particular passage during playback, press and hold the
current playing track at high speed until desired point (passage) appears, then release the button for normal
playback mode.
7. To select a song which track number exceeds 10, press the
the /+10 or /-10 button each time to skip forward/backward 10 tracks.
Important: The USB port is intended for data transfer only, other devices cannot be used with this USB
connection. The use of USB extension cords is not recommended. Don't plug the USB from the unit when
playing or reading the USB device.
EN – SPK614
/-10/TUN.- to tune to a desired station, the station frequency will show on
/-10/TUN.- button to select the desired station that you want to save
/+10/TUN.+ button or
/BT button on unit. The playing time will flash on the display.
/BT button again.
/+10 or /-10 button respectively during playing until the desired track
10
/BT/SCAN button on unit.
/-10/TUN.- button.
/+10/TUN.+ button or
/-10/TUN.- button.
/+10 or /-10 button to scan the
/BT button to pause playback, then press and hold
/-10/