Safety Features - Pur Line HOTI M50 Manual De Usuario

Turn ON time:
HOUR: Press "W·Timer" button 2nd time, "II/H" light is on, press
MINUTE: Press "W·Timer" button 3rd time, "Fan/M" light is on, press
Turn OFF time:
HOUR: Press "W·Timer" button 4th time, "II/H" light is on, press
MINUTE: Press "W·Timer" button 5th time, "Fan/M" light is on, press
The timer for Monday is set.
3. Press "W·Timer" button once more, to set timer for Tuesday, "I/W" light is on. "2" in display means "Tuesday".
Set the timer in the same way as for Monday.
4. When the timer is set for all week days, press "DELAY" button on remote control 7 times to set from Monday
to Sunday's temperature (1-7) and press
49ºC.
Note: In the weekly timer function, when you set the day's temperature, the thermostat function will start, the
steps are the same as for THERMOSTAT.
You can set different start times, turn-off time and temperature for each day.
6) OPEN WINDOW DETECTION (only by remote control)
1. Switch on the appliance in any mode (fan, 1000W heating or 2000W heating).
2. Press "AUTO" button, "AUTO" light is on and the device operates with an smart energy saving mode. (In this
function, the device is checking and recording the ambient temperature, it will stop to function when the
ambient temperature is detected to drop ≥ 3ºC. The user should restart the appliance with "ON/OFF" button).
3. Press "AUTO" button again, "AUTO" light is off. Open Window Function is turned off.
7) DELAY (only by remote control)
1. This function must be configured before the device is in operation, and while the device is in standby mode.
2. Press the "LOCK" button, the corresponding indicator lights up, then press the "DELAY" button, the "Delay"
and "I/W" indicators light up. Press
3. Press the "DELAY" button again, the "Delay" and "II/H" indicators light up. Press
time from 01--24.
Note: When "Delay" is pressed, the numbers flash on the display for 5 seconds, the unit must be operated
during this time, or the unit will return to standby mode and you need to press "Lock" button and reset again
all (This function is one-time and must be reset if the power is cut off.)
8) CHILD-LOCK function (only by remote control)
1. This function can be used in any mode.
2. Press the "LOCK" button, the indicators and the LED display are off, only the "Power" indicator is on. Neither
the control panel nor the remote control can operate the device.
3. Press the "LOCK" button again, all the indicators will be on and both the control panel and the remote control
can operate the device.

SAFETY FEATURES

Your heater is fitted with a safety device to switches off the heater in the event of overheating. If the safety
device operated, please turn the heater off, unplug the appliance and let it completely cool, inspect for
blockage of air inlet or outlet, attempting to restart the heater then after.
If the heater fails to operate or the safety device switches the heater off again, return heater to your nearest
service center for examination or repair.
"+"
-
o " " buttons to select the temperature, in a range from 10ºC to
"+"
-
or " " button to set the Start Time from 01--24.
12
"+"
-
or " " buttons to set the Hour from 01--00.
"+"
-
or " " to set the Minutes from 00--59.
"+"
-
or " " to set the Hour.
"+"
-
or " " to set the Minutes.
"+"
or "
-
" to to set the turn-off