dirna Bergstrom bycool SPLIT Instrucciones De Montaje página 15

SPLIT
9
Mount the cover with the previously removed
screws.
10
Make boreholes in the cabin, if necessary, for
the piping, cabling and wastewater pipe output.
11 Position the sleeve and take out the piping and
cabling.
12
Cut the wastewater pipe and connect the
two T-joints in the evaporator, then run the
two pipes to the outside through the most
appropriate place, ensuring there are no loops
or constrictions. Position drainage valves in the
pipes.
Air conditioning for vehicles
9
11
15
EN
towards the outside
drainage valve