FTE Maximal MTW 310 Manual De Usuario página 12

Programming
MTW 310 has two ethernet connectors. In order to program a module we have to connect the programmer to the "PRO
201" connector.
Next, we will proceed to recognize the module and to show the main menu.
We have to use the "Up" and "Down" buttons of the keyboard in order to move to the different options, and to get into the
submenus we have to press "OK" button. To return to the previous menu, press " Cancel" button.
The following steps appear:
-
Select device: This parameter indicates which of the two modulators is being to be programmed. Only two options
are available: 1 or 2. Use the "Left" and "Right" buttons. Press "Ok" and a new menu will appear.
For programming the parameters, a line appears under the selected parameter. Once the parameter is
selected, using the OK button to skip from one to another one, you can change the value of the
parameter with the UP/DOWN arrows. For modifying the frequency parameter, you can do it (the digit
values) through the keys UP/DOWN and moving through digits with keys LEFT / RIGHT. For validating,
push OK.
- Std: It fixes the modulation Standard of the output signal. The possibilities are: PAL B/G - PAL D/K -
PAL I - SECAM L
- Audio: This parameter is only modifiable in PAL B/G Standard. It indicates the type of audio Mono (mn)
or Stereo (st).
- Frequency: It indicates the frequency of the video carrier of the modulated channel.
- RF Level: Output signal regulation. Options: 0-15.
-
SW Update: This option allows updating the software of the module.
-
Update DAC Tables: This option allows updating the tables of values of temperature compensation.
User's manual · MTW 310
MTW 310
>Select device:
SW Update:
Update DAC Tables
MTW 310
Std: B/G Audio: st
Frequency:530.00 MHz
RF Level: 12
- 3 -
1
MTW 310 version_en_1.0 FTE maximal