Cleaning And Maintenance; Technical Information - ECG FS 40N Manual De Instrucciones

2 - Fan is running at medium speed.
3 - Fan is running at high speed.
• The fan can rotate during operation.
• For the fan head to rotate, push the automatic rotation control down.
• To stop the rotation of the fan head, pull the automatic rotation control up.
• The fan head can be set up or down. Loosen the vertical setting nut, adjust the desired angle of the fan
and tighten the nut again.

CLEANING AND MAINTENANCE

1. The fan must be switched off and the cord disconnected from the outlet prior to cleaning.
2. Wipe the plastic parts with a towel or moist sponge dipped into a soap agent. Wipe dry. Do not immerse
the fan into water!
3. To dismantle the fan, proceed in the opposite sequence as for the assembly process.
We recommend keeping the package for transporting the fan or storage.
GB

TECHNICAL INFORMATION

Diameter 40 cm
Nominal voltage: 220-240 V~ 50 Hz
Nominal input power: 50 W
Noise level: 63.7 dB
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into
plastic recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specified location for recycling electric and electronic equipment. Prevent
negative impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the
product.
This product complies with EU directive requirements on electromagnetic compatibility and
electrical safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.
30
08/05