MS SMAGIC-FIX Manual De Instrucciones página 32

INSTRUCTIONS
guides provided with the SMAGIC-FIX seat.
(These guides for the Isofix connectors must be
positioned as shown in F5)
Warning: If the seats of your car are equipped
with Isofix anchors, you can install the SMA-
GIC-FIX seat using the SMAGIC-FIX anchors,
but ALWAYS and ONLY in combination with the
vehicle seat belts. See usage list.
2.1. Rotate the SMAGIC-FIX anchors from the
base outwards towards the back of the vehicle
seat.(F6)
2.2. Place the safety seat in the appropriate po-
sition. Make sure that the SMAGIC-FIX anchors
are lined up with the vehicle's lsofix anchors.
2.3. Push the SMAGIC-FIX car seat against the
backrest of the vehicle seat, and at the same
time insert the two SMAGIC-FIX anchors into
the plastic guides previously fastened into the
anchor points until both click into place.(F7)
2.4. Make sure that it is firmly in place, check
both connectors of the vehicle's Isofix anchors
by pulling outwards, they should not move ou-
twards at all.
32