Environmental Protection; Technical Specifications - Metabo HJA 14.4-18 Manual De Instrucciones

e
8. Faults
Ensure that the maximum output power of the
Power Adapter is not exceeded (observe operating
instructions of the Power Adapter!).
In case of overheating of the garment, the heating
elements are switched off automatically, let the
garment cool down for 30 minutes before switching
back on the heating elements. Any attempts of
switching on after automatic shutdown may lead to
damage to the heated jacket, Power Adapter or battery pack.
9. Cleaning
Interrupt the connection between garment and
Power Adapter and remove the battery pack
prior to effecting any type of cleaning.
Prior to cleaning remove all contents of the pockets,
in particular the Power Adapter, battery pack and
USB devices.
Close the zippers of all pockets.
The connection plugs (4) can be washed together
with the jacket.
Do not clean with aggressive cleaning agents.
Prior to connection with the Power Adapter, the
garment and the contacts have to be dry.
Refer to the instructions on the inside of the garment
for washing:
hand wash up to max. 40°C
do not bleach
no dry cleaning
dry on washing line
do not tumble dry
do not wring
do not iron
10. Repairs
Repairs to the device must only be carried out by
qualified electricians.
Contact your local Metabo representative if you
have Metabo guards requiring repairs. See
www.metabo.com for addresses.

11. Environmental Protection

Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.

12. Technical Specifications

XS 6.57025
S 6.57026
M 6.57027
L 6.57028
XL 6.57029
XXL 6.57030
XXXL 6.57031
Rated input
max. heating output
Heating element hands
Heating element body
Changes due to technological progress reserved.
D = Collar diameter
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH en
12V DC / 1.8A
21.2 W
Stage flashing red 5.4 W
Stage red 4.1 W
Stage orange 2.7 W
Stage blue 1.4 W
Stage flashing red 15.8 W
Stage red 11.9 W
Stage orange 7.9 W
Stage blue 4.0 W
11