User's manual Rubino
Please read these instructions carefully before assembling and using the sun lamp Rubino
93131. Make sure you only use this appliance in accordance with the recommended
treatment times, tanning intervals, and tanning distance.
Power supply
This product should only be connected to a 230V 50Hz socket. Never place the sun lamp in
a bathroom, sauna, or any other damp room.
Protective goggles
Ultraviolet radiation is harmful to the eyes. A pair of protective goggles, which must be
worn with every use, has therefore been included with this sun lamp. Never use "regular"
sunglasses instead of the protective goggles. Even shutting the eyes provides inadequate
protection. A spare pair is also included.
Operation
Start the Rubino by opening the two side panels by pushing button A (see drawing 1).
Panels will open themselves by a built in spring. Open the panels till they cannot go any
further 1 B. DON'T FORCE SINCE THAT MAY CAUSE DAMAGE. The panels should stay in a
certain angle to give maximum side tanning on the face. Turn the product in the right
position towards the face. The chosen position can be fixed by turning the knob on the right
side of the Rubino (turn to the left 1 E). Plug the mains lead into the socket and set the
timer1 C
DRAWING 1
8