Replacing The Plug Fuse (12/24 V); Replacing The Light Bulb; Cleaning And Maintenance - Mobicool FR35 Instrucciones De Uso

Cleaning and maintenance

6.10

Replacing the plug fuse (12/24 V)

➤ Pull the adapter sleeve (fig. 5 4, page 4) off of the plug.
➤ Unscrew the screw (fig. 5 5, page 4) out of the upper half of the housing
(fig. 5 1, page 4).
➤ Carefully raise the upper half of the housing from the lower (fig. 5 6,
page 4) half.
➤ Take out the contact pin (fig. 5 3, page 4).
➤ Replace the defective fuse (fig. 5 2, page 4) with a new one that has the
same rating (8A 32V).
➤ Re-assemble the plug in the reverse order.
6.11

Replacing the light bulb

➤ Press the switch pin (fig. 6 2, page 4) downwards so that the transpar-
ent part (fig. 6 1, page 4) of the lamp can be removed at the front.
➤ Replace the light bulb.
I
NOTE
The LEDs in the light bulb must be aligned with the transparent
part of the lamp.
➤ Press the transparent part of the lamp back into the housing.
7 Cleaning and maintenance
!
WARNING!
Always disconnect the device from the mains before you clean
and service it.
A
NOTICE! Risk of damage
 Never clean the cooler under running water or in dish water.
 Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
16
FR35 AC/DC
EN