Mounting Instructions - D-Link DCS-1201 Guia De Instalacion

Mounting Instructions

It is highly recommended that you configure and test your camera before mounting it.
Mounting directly on a wall/ceiling
Use the included screws to mount the camera in the desired location, then attach the
camera cover.
Covert installation
Drill a hole 9 mm in diameter in the wall/ceiling, which should be no more than 5 mm
thick. Peel off the adhesive backing on the flat mounting bracket and attach it to the
inside of the wall/ceiling. Insert the camera, and use the screw and washer to secure
the camera in the mounting bracket as shown.
Mounting using the angled mounting bracket
Attach the angled mounting bracket to the wall/ceiling using the included screw. Attach
the camera to the angled mounting bracket with the included screws as shown. You can
adjust the pivot of the angled mounting bracket by using the included hex wrench.
6
D-Link DCS-1201 Quick Installation Guide