Cepra 5300 Manual De Instrucciones página 34

Chronothermostat 5300
TIEMPO
• When the key is pressed for the fifth time, the
FUNC.
operating hours of the previous week plus the current
week are displayed on the screen. All of the days of
week will be blinking.
IMPORTANT:
If you keep pressing the
three seconds, the
HOW TO DELETE THE PROGRAMMING
By pressing the
BORRAR
tments entered
this happens, the crono-thermostat makes a check-up of
all the segments of the screen, it recovers the default
standard program and the clock displays the 00:00
hours of the Sunday. The screen remains flashing until
you press any key.
HOW TO ADJUST THE COMMUTATION DIFFERENTIAL
• Press the SET key to go to the main screen.
TEMP
• Pres the key to display the upper limit of the
INTERV
commutation HI.
TEMP
• Press the key again to display the lower limit
INTERV
of the commutation LO.
To modify the adjusted value:
• Press the key. Keep pressing it and press the
SET
TEMP
key. The screen displays HI and its current
INTERV
value is flashing.
TIEMPO
key during more than
FUNC.
counters reset to zero.
key you will delete all the adjus-
in the crono-thermostat. When
• With the keys select the new value for the
upper limit HI. (See the equivalency table).
TEMP
• Press the key again. En la pantalla aparece
INTERV
LO y su
• By using the
lower limit
• To finish with the adjustment, press the
In the following table you will find the equivalency bet-
ween the adjusted values HI and LO and the correspon-
ding temperatures.
Upper Equiva-
Value
limit
Hi 0 0
Hi 1 +1
Hi 2 +2
Hi 3 +3
Hi 4 +4
Hi 5 +5
Hi 6 +6
Hi 7 +7
Hi 8 +8
Hi 9 +9
NOTE: The minimum commutation differential is 0,5K.
3 3 4 4
valor actual parpadeando.
keys select the new value for the
LO. (See the equivalency table).
Lower
Value
lence limit
Lo 0 0
0
Lo 1 -1
+0,5
Lo 2 -2
+1,0
Lo 3 -3
+1,5
Lo 4 -4
+2,0
Lo 5 -5
+2,5
Lo 6 -6
+3,0
Lo 7 -7
+3,5
Lo 8 -8
+4,0
Lo 9 -9
+4,5
key.
SET
Equiva-
lence
0
-0,5
-1,0
-1,5
-2,0
-2,5
-3,0
-3,5
-4,0
-4,5