Tabla de contenido
Idiomas disponibles
Idiomas disponibles
- If you find that your phone can not connect the WIFI of the camera,
please confirm that your connection is correct, if so, you still can not
connect. Remove the Wi-Fi SSID from the camera in the Wi-Fi settings of
the phone and then reconnect it. If necessary, you can also remove the LIVE
DV / APK from your phone and re-download and reinstall it.
REMOTE CONTROL
2.4G wireless remote control: splash resistant/reach 20/30 meters. Place the
remote control on your wrist and allow you to control the camera while
doing any activity.
Verify that the remote function of the camera is in the ON mode. Select
ON/OFF in the setup menu to turn on / off the 2.4G remote control.
Video: Verify that the camera is in Video / Photo preview mode first, if the
camera is set to Playback or Setup Menu, the camera can not receive the
remote signal and can not be controlled by the remote control.
To start recording: Press the Video button. The operation indicator of the
camera and a red dot on the screen will flash during recording.
To stop recording: Press the Video button again. The camera's operation
indicator and a red dot on the screen will stop flashing to indicate that
recording has stopped.
NOTES
Photo: Verify that the camera is in Video / Photo preview mode first, if the
camera is set to Playback or Setup Menu, the camera can not receive the
remote signal and can not be controlled by the remote control.
Take a photo: Press the photo button, the camera will emit a shutter sound.
To take burst photos: Verify that the camera is set to burst mode, and press
the Photo button, the camera will emit the shutter sounds each time a
picture is taken.
To take photos in time lapse mode: Verify that the camera is set to Time
lapse Photo mode, and press the Photo button, the camera starts the
countdown and emits a shutter sound from the camera.
Tabla de contenido
