Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7 - STOP ADJUSTMENT
7A - INTRODUCTION
The mechanical-stop enables to stop the gate at a required position, avoiding the door to hit the stop devices.
7B - INSTRUCTION FOR THE REGOLATION
INSTRUCTION (see pic.7):
- Set the gear-motor on manual override (pic.4).
- Twist off the screw of the mechanical-stop (B or D).
- Move the door to the desired opening/closing position.
- Place the mechanical-stop next to the sliding pin (C).
- Turn the screw tightly.
- Set the gear-motor on automatic functioning (pic.5).
7
D
C
B
!
The gear-motors are normally provided with mechanical stop in open position. In case of lack of external
mechanical stop in closing position, it is possible to buy the optional mechanical stop.
Tabla de contenido
