Product Illustration - IF Lighting Equinox 1000 Especificación, Garantía Y Manual De Operación

Connecting Power to the Unit
Use the supplied cord and connect the cord to an electrical outlet of appropriate type and rating.
Ensure that the cord:
Is not concealed or extends through a wall, oor, ceiling or other parts of the building structure.
Ÿ
Is not located above a suspended ceiling or dropped ceiling.
Ÿ
Is not permanently afxed to the building structure.
Ÿ
Is routed so that it is not subject to strain and is protected from physical damage.
Ÿ
Is visible over its entire length.
Ÿ
Turning the unit On and Off and Dimming the Unit:
The unit includes a dimming knob and an on/off switch. Turn the power switch to the on position and set your desired output
using the dimming knob from 0-100 percent.
Adjusting the Hangers and Distance from Plants: Hangers include a large amount of rope to meet a variety of desired mounting heights with a push button to release tension
on the rope. We recommend mounting the unit between 18-24" above the canopy for optimal performance. Hold down the
release button on the hanger, adjust the rope to the desired mounting height and release the adjustment button to secure the
height.
Adjusting the mounting angle of the unit:
If the mounting hangers are installed around a supporting beam described on page two, the tension of the rope on the beam
is strong enough to secure the unit in a variety of mounting angles for setups where the canopy is not evenly distributed. Simply
raise or lower on side of the unit to the desired angle. Be careful not to lower the unit within 18" of the canopy in any area.
Cooling
Unlike other forms of lighting, LEDs dissipate all of the produced heat into the light xture. The light xture is required to
dissipate this heat into the air as efciently as possible. To achieve optimal performance and longest lifespan, the Equinox
1000 should be mounted in the path of direct airow in the growing area. The xture can also operate in a no airow
environment however the over-temperature system will automatically and gradually reduce the power in order to preserve the
lifespan of the components.
Top View
Side View
Bottom
View
OPERATION OF THE LIGHT

PRODUCT ILLUSTRATION

Mounting Hooks
Heat Vents
Dimming Dial
Power Receptacle
On/Off Switch
LED/Wiring Guards
LED Strips
English-3