Installing The Vacuum Cleaner - Dometic CV1004 Instrucciones De Montaje Y De Uso

CV1004
7

Installing the vacuum cleaner

!
WARNING! Danger of electrocution and serious injury.
Beware of electrical cables in the wall when drilling and sawing.
A
NOTICE!
 Mount the vacuum cleaner in a dry place.
 Do not mount the vacuum cleaner in an area which is subject
to high temperatures.
 Do not bend the connection cable round sharp edges or cor-
ners. Keep the connection cable away from heated surfaces.
 To install the vacuum cleaner, the wall thickness must be a
minimum of 10 mm and a maximum of 25 mm.
 Ensure there is a socket nearby which can be used to supply
the vacuum cleaner with power. Do not use extension cables.
 If the vacuum cleaner is being installed in small spaces with
poor ventilation (e.g. cabinet), then an air outlet and an air out-
let grille with a cross-section of 70 mm must be installed in
order to transport warm air generated by the device outside.
➤ Ensure that the dust bag and the motor filter are in place.
➤ Check the vacuum cleaner works prior to installation.
A
NOTICE!
The bolts on the housing must not be screwed out completely
because they are fitted with a spring mechanism.
➤ Mount the vacuum cleaner (fig. 4, page 4 to fig. 0, page 5).
I
NOTE
The mounting connectors (fig. 3 1, page 4) need to be glued on
the device-side using a standard adhesive. The screw connectors
(fig. 3 2, page 4) are screwed into the connection hose and
inserted into the mounting connectors.
➤ Mount the hose socket and route the connection hose (fig. a, page 5,
and fig. b, page 5).
EN
Installing the vacuum cleaner
13