SOLAC Choco-Latte Instrucciones De Uso página 6

ENGLISH
DESCRIPTION
A Body
B Handle
C Lid
D Network connection plug
E Cable connector
F Connector input
G Base
H On/off switch
If the model of your appliance does not have
•
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
USE AND CARE:
Do not use the appliance when empty.
•
Do not use the appliance if the on/off switch
•
does not work.
Do not move the appliance while in use.
•
Use the appliance handle/s, to catch it or move
•
it.
Do not use the appliance if it is tipped up and
•
do not turn it over.
Do not turn the appliance over while it is in use
•
or connected to the mains.
To keep the non-stick treatment in good condi-
•
tion, do not use metal or pointed utensils on it.
Respect the MAX and MIN levels.
•
Disconnect the appliance from the mains when
•
not in use and before undertaking any cleaning
task.
Store this appliance out of reach of children
•
and/or persons with physical, sensory or re-
duced mental or lack of experience and knowl-
edge.
Do not store the appliance if it is still hot.
•
Never leave the appliance connected and un-
•
attended if is not in use. This saves energy and
prolongs the life of the appliance.
CAUTION: Water condensation may appear
•
on the surfaces and objects around this appli-
ance.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that all products' packaging has
•
been removed.
This appliance has only been designed for
•
warming milk and liquids, and for preparing hot
chocolate. Do not use it for any other purpose.
Before using the product for the first time it is
•
advisable to boil water within, so as to remove
all remaining dust and impurities.
Before using the product for the first time, clean
•
the parts that will come into contact with food in
the manner described in the cleaning section.
Some parts of the appliance have been lightly
•
greased. Consequently, the first time the appli-
ance is used a light smoke may be detected.
After a short time, this smoke will disappear.
Prepare the appliance according to the func-
•
tion you wish to use:
USE:
Extend the cable completely before plugging
•
it in.
Ensure that the electronic connector is proper-
•
ly attached to the appliance.
Insert the cord connector into the connector on
•
the base of the milk warmer.
Connect the appliance to the mains.
•
Raise the lid and pour the milk into the milk
•
warmer. The quantity of milk must be between
the MIN and MAX marks.
Turn the appliance on, by using the on/off
•
switch.The pilot light will come on.
HEATING MILK
Wait a few minutes until the milk has reached
•
the required temperature.
We recommend keeping the lid closed while
•
the appliance is operating, to prevent skin from
forming.
Once the maximum temperature (80ºC) has
•
been reached, this temperature will remain
constant but without boiling.
PREPARING HOT CHOCOLATE
Break the chocolate up into pieces for better
•
dissolution.
Add the pieces of chocolate to the milk.
•
Stir gently from time to time using a wooden
•
spoon until an even mixture has formed. Do
not use abrasive products that could damage
the coating.
Add more chocolate or milk to the mixture to
•
obtain thicker or thinner chocolate, depending
on your preference.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Turn the appliance off, using the on/off switch.
•
Unplug the appliance from the mains.
•
EN