Water Outlet - Maxspect Aeraqua Duo AD600 Manual De Usuario

Aeraqua Duo Protein Skimmer features three different ways for you to adjust the foaming
performance.
1. Water Inlets
Aeraqua Duo's unique design allows you to choose the ways of drawing water into the
skimmer by turning the water inlets.
For example, if there is a certain amount of fish and corals.
1) For a 400-750L/100-200gal aquarium, if it means high bio-load to the aquarium, it is suggested
to open 80 percent of one water inlet to draw water from outside of the skimmer while fully
close the other one to make it internal recirculation.
2) For a 750-1,250L/200-325gal aquarium, if it means medium bio-load to the aquarium, it is
suggested to fully open one water inlet to draw water from outside of the skimmer while open
30-50 percent of the other one to draw water from both inside and outside of the skimmer.
3) For a 1,250-1,700L/325-450gal aquarium, if it means low bio-load to the aquarium, it is
suggested to fully open both of the water inlets to draw water from outside of the skimmer.
The suggestion mentioned above is only a general guideline helping to explain the use of
water inlets. Which is suitable for your aquarium will be verified only after carefully tuning
observing of the skimmer.
IMPORTANT: DO NOT FULLY CLOSE BOTH OF THE WATER INLETS AT THE SAME TIME.

2. Water Outlet

You can control the water level by
Turning the water level adjustor.
Operation
EN
7