Cepra 4600 Manual De Instrucciones página 12

RESET
• Press for resetting computer back to fac-
0
RESET
tory program & clock to 0:00.
INSTALLATION
The equipment may only be installed and / or mounted by
an expert according to the existing safety regulations.
The installing possitioning should be aprox. 1.5m above
floor level, avoiding external walls and draughts from win-
dows and doors. Ensure normal air circulation can reach
the controller. Avoid heat from other sources e.g direct sun-
light, central heating pipes, radios and TV an any other
source of heat whch could produce unrepresentative con-
ditions.
Please asure that before installing the termostat, the main
power is turned off.
Press the hook situated on the bottom of the front cover,
simultaneously pull the front cover and introducing the fin-
gers into the holes on the back side of the base.
Fix the base onto the wall with two screws.
In order to do the electrical connection, unscrew the cover
protecting terminals. Conect the wires exactly according to
the wiring is correct.
Put the cover back fixing the screws and afterwards do the
same with the front cover. Make sure that the hooks of the
base are looked.
Now you can turn on the main power again.
11
HEATER REGULATION
REGULATION OF
PUMPS CIRCULATING
AND VALVES