1. Parts overview (Fig. 2+3)
1. Monocular
2. Eyepiece
3. Foldable rubber eyecups
4. Zoom setting
5. Zoom scale
6. Focus setting
7. Scale for the object distance
8. Proximity focusing / macro
9. Object lens
10. Carrying strap holder
2. Focusing
Configuring an observation object with this monocular
sharply, is basically dependent on the distance to the
object. Thanks to the integrated macro function, you
are able to focus the image not only at a long range,
but also in the close range of less than half a meter.
2.1 Conventional focus setting
Set the lowest magnification (8x) on the zoom scale
(5) using the zoom setting (4). Turn the focus setting
(6) till the calibration mark ∞ on the scale for the
object distance (7) is detected. Look through the
- 12 -