Beper RI086 Manual De Instrucciones página 9

PTC Fan Heater Use instructions
PRODUCT DESCRIPTION Fig. 1
1 – Thermostat
2– Function selector
3 – Protection grid
4 – Base
5 – Power cable
Usage:
11. Please check before you use:
A: The heating wire and electric wire can not be broken.
B: Please do not uses the socket lower than 10A for fear of any accident.
12. Use the fan heater on the flat place to avoid being toppled.
23. Power & turbo knob
●: "OFF"
: Cool air
I: for low heat
II: for high heat
4. There is a thermostat knob for adjusting heating. You can rotate the knob to get your desired
heating level.
SAFETY PROTECTION SYSTEM
This unit has protection safeguards that shut off the unit when components become excessively hot
or if it tips over.
IF OVERHEATED
If heater becomes overheated, it will shut down automatically and the heater will turn off. Please
note that the red power light will go off and you smell a slight odor due to the coils overheating. This
is normal and the odor will subside.
Remove any nearby objects that may be causing overheat conditions. Keep at least three feet of
space on all sides of the unit to allow adequate air circulation.
Use the unit in a well-ventilated area.
The unit will start automatically when it has cooled sufficiently. Please note this cool-down period
could take 30-45 minutes. When heater is cooled the red power light will come back on and the
heater will begin to heat.
IF TIPPED OVER
If the heater tips over, it will shut down automatically and the red power light will turn off. Place the
unit on a flat, smooth, stable surface in order to prevent it from tipping over again. Caution; Front of
unit is hot. Handle with card, the unit will restart automatically.
9