Providing The Appliance With Electricity; Operating The Appliance; Using Headphones; Playback Of Cds - WELLTECH KH 2297 Instrucciones De Uso

Providing the appliance with
electricity
First of all, remove all packaging material from the
appliance. This appliance is designed for operation
with an alternating current power supply of 230V /
50 Hz. Connect the power cable
installed domestic power socket. The appliance is
now ready for use.
Battery for data preservation
Should the appliance be separated from the power
source, the programmings for time and alarm times
will be lost. If this happens during the night, then
the appliance will not be able to wake you in the
morning as wished. To avoid this eventuality, you
can place a 9V battery (not supplied) into the
battery compartment on the underside of the
3$
appliance that, during a power failure, will preserve
the programmed data. Take note that during a
power failure the appliance cannot be used, even
with a battery in place, the battery serves only the
preservation of the time and the alarm settings. The
battery should be renewed annually.

Operating the appliance

Setting the time
After you have connected the appliance with the
power source, "12:00" blinks in the display
appliance can display the time in either the 12 hour
(AM/PM) or the 24 hour format. From the factory it is
set in the 12 hour format. To switch over to the other
format, press and hold the button TIME
seconds. Following this, the display
which time format you have just switched over to. Repeatedly press the button HOUR
pressed down, until the number of the current hour
is shown. Now repeatedly press the button MINUTE
, or keep it pressed down, until the number of the
o
current minute is shown. Then press the button TIME
. The programming of the time is now finished, the
u
numbers glow constantly.
Switching the appliance on
If you wish to listen to the radio or play a CD, press
the button ON/OFF
In the display the operational indicator (ON/OFF,
) appears. Slide the function switch (FUNCTION
1(
1% ) to the position of the programme source that is to
be played by the appliance:
with a correctly
3@
• "CD" for CD playback, or
• „RADIO" for radio reception.
Press the button ON/OFF
radio off.
Adjusting the volume
The volume regulator (VOLUME,
set the desired playback sound volume. Turn the
regulator in the direction of the "+" sign to increase
the sound volume. Turn it in the direction of the "—"
sign to reduce the sound volume.

Using headphones

At the headphone socket (PHONES
can connect headphones with a 3.5 mm jack plug.
When they are connected, the built-in loudspeaker
1$ is automatically switched off.

Playback of CDs

In principle, this appliance plays back both Audio-
CDs and also CD-R(W) media produced on a
computer. However, due to the great variations in
. The
2$
blank discs, computer types, operating systems,
burning software and burning processes, we cannot
guarantee that every "burnt" disc can be played
back without problem.The appliance cannot play
for ca. 2
u
back CD-ROM or DVD media.
2$ briefly shows
Optimal handling of CD's
, or keep it
i
• To avoid finger traces and
contamination, take hold of CDs
only on the edges.
• Carefully wipe dirtied CDs with
a lightly moistened lint-free cloth,
from the middle to the edges.
Avoid circular movements! Do not
use solvents, they can damage the
CD.
- 20 -
to switch the appliance on.
q
again to switch the
q
) is used to
2*
, ) you
3)