Tabla de contenido
6. Troubleshooting
Problem
The temperature is too low
1.1
The temperature inside the
freezer is too low, with the fresh
1.2
The temperature inside the
fresh food compartment is too
cold, while the freezer sections
1.3
The foods stored in the full
width pantry are frozen.
1.4
The foods stored in the crisper
are frozen.
1.5
Readings on the dispenser
display are showing error
codes.
The temperature is too high
2.1
The freezer drawer sections
or fresh food compartment
temperatures are too high.
2.2
The temperature is too warm in
the freezer but okay in the fresh
food section.
2.3
The temperature is too warm in
the fresh food section but okay
in the freezer.
2.4
The temperature inside the
crisper is too warm.
Water, humidity or frost/ice in the fridge
3.1
Moisture formation on the
inside of the fridge.
3.2
Water droplets collect in the
lower crisper drawer areas.
Cause
1.1.1
The temperature inside the
freezer section is set too low.
1.2.1
The temperature inside the
fresh food area is set too low.
1.3.1
The control setting in the
fresh food area is set too cold.
1.4.1
The settings for the fresh
food compartment are too
cold.
1.5.1
An electronic operating
problem has been
encountered.
2.1.1
The doors are opened
frequently or for too long
each time.
2.1.2
The doors are left open.
2.2.1
The temperature setting in
the freezer is set too warm.
2.3.1
The temperature setting in
the fresh food section is set
too warm.
2.4.1
The fresh food set
temperature is too warm.
3.1.1
It is in a hot or humid
environment.
3.1.2
The door is left open.
3.1.3
The door or drawer is opened
too frequently or for too long
each time.
3.1.4
Food containers or liquids are
left open.
3.2.1
Humidity settings are set too
high.
20
Solution
1.1.1.1
Set the temperature in the freezer slightly
higher then wait 24 hours for new balance to be
achieved.
1.2.1.1
Set the temperature inside the fresh food
section slightly warmer. The temperatures will
reach new balance within 24 hours.
1.3.1.1
Set the fresh food control setting slightly higher.
The new set point temperature will reach a
balance within 24 hours.
1.4.1.1
Raising the fresh food control settings to a
slightly higher temperature and/or lowering the
humidity control setting will prevent frost or ice
forming.
1.5.1.1
Call your service engineer who can diagnose the
problem and make correction.
2.1.1.1
Try to reduce the frequency of opening doors.
2.1.2.1
Take extra care to keep gaskets sealing well
around the perimeter of the doors. Keep gaskets
clean and dirt free.
2.2.1.1
Set the temperature colder for the freezer
section. Then allow it to balance within 24 hours
at new colder temperature.
2.3.1.1
Set the food temperature control slightly colder.
The new colder temperature can be achieved
within 24 hours.
2.4.1.1
Set the fresh food temperature colder and the
balance to colder temperature will be achieved
within 24 hours
3.1.1.1
Try raising the temperature slightly in the
3.1.2.1
Check to make sure the door gaskets are clean
and sealing well against the metal cabinet
frame.
3.1.3.1
Reduce the frequency of door openings.
3.1.4.1
Let hot foods cool to room temperature and
cover foods and liquids.
3.2.1.1
It is normal for some wet air to collect inside the
enclosed crisper. To reduce the accumulation
of moisture, lower the humidity setting and/or
raise the fresh food compartment temperature.
Capítulos
Tabla de contenido
Solución de problemas
