Imit WPT V Manual De Instrucciones página 12

Press Esc to quit the menu.
INSTALLER MENU (Fig.12)
In OFF mode, hold OK for 10 seconds to enter the menu:
Press ◄► to browse the available options.
1. Antifrost = Set antifrost threshold (standard 6.0°C);
2. Hysteresis = Switching differential (standard 0.2°C);
3. Offset = temperature calibration (standard 0.0°C);
4. NTC Internal / NTC External ;
5. Hold OK to reset and restore factory settings.
Press Esc to quit the menu.
HUMIDITY DISPLAY OPTION (AVAILABLE ONLY ON WPT H MODELS)
In one of the operating modes, press OK to switch between the set temperature or room humidity display
in the top right of the screen (Fig.13).
Manuale WPT multilingue interno.indd 12 19/11/15 15:57