SVB SEATEC 7X50 Manual De Instrucciones página 7

Compass 3
Your binoculars are equipped with a compass. If you
press the button and look through the binocular, you will
see an indication in degrees (350...360...) at the lower
edge of your field of view. If 360 is exactly at the centre
of the scale you are looking directly to the north (if 180,
to the south).
Calibration/Mode
1. Press the power button to start the compass.
2. Press and hold the power button for 5 seconds.
The P Mode appears which indicates the angle of
inclination (horizontal) from -90° to +90°.
3. Press and hold the power button again for 5 seconds
to enter the tilt angle mode.
4. Press and hold the power button for another 5 se-
conds. The digital compass is now automatically
calibrated and ready for operation.
Changing the batteries (Fig. 2)
Remove the plastic battery compartment cover 4 by
raising it gently. Open the compartment 4 by turning
the latch with a coin and then change the batteries (GP
186). Both batteries must have the positive (+) pole at
the top when inserted in the compartment.
GB/IR
Cleaning your binoculars
1. Remove coarse dust with a brush.
2. Please use a soft fluff-free cloth for further cleaning.
3. Should there still be residue on the lens dampen the
cloth with standard cleaning fluid for optical glass
(available from photography shops). Do not press hard
when cleaning.
Warranty & Service
The period of warranty is 2 years, beginning on the day
of purchase. Please keep the cash receipt as evidence
of purchase. Devices which become defective during
the warranty period can be returned to the dealer where
the device was bought. The repaired device or a new
one will then be returned to you. In the case of defects
which occur after the end of the warranty period, the
devices can also be returned. However, repairs which
become necessary after the end of the warranty period
will be subject to a service fee.
- 7 -