Unold 78131 Instrucciones De Uso página 26

22. Never leave the mincer unattended. Keep the appliance out of
DE
reach of children. The mincer must not be used by children.
EN
23. When transporting the appliance carry it with both hands at the
motor block – not at the feed pan or the mincer.
FR
24. Never push the food into the feeding tube with your fingers.
NL
Always use the feedstick for this purpose. Risk of injuries!
25. In order to avoid food blocking the feeding worm, do not fill in
IT
with excessive pressure, but only slightly.
26. If the food gets stuck in the feeding worm, press the reverse but-
ES
ton II for a few seconds to remove the blocking.
PL
27. If the appliance gets repeatedly blocked, disconnect the appli-
ance from the mains. Open the worm housing and remove the
obstacles. Then reassemble the appliance and continue to pro-
cess the respective food. When switching over from I to O or to
II, wait a few seconds until the motor has stopped.
28. The mincer must only be used to mince meat, fish, and vegeta-
bles. Do not mince hard parts such as bones, or nuts. Do not
mince hard-fibre foods such as ginger etc.
29. Disconnect the appliance from the wall socket after use and prior
to cleaning. Never leave the appliance unattended when it is con-
nected to the wall socket.
30. Let the appliance cool off before cleaning it.
31. Never open the casing of the mincer. There is danger of electric
shock.
32. Check the appliance, the wall socket and the lead cable regularly
for wear or damage. In case the lead cable or other parts appear
damaged, please send the appliance or the base to our after sales
service for inspection and repair. Unauthorised repairs can con-
stitute serious risks for the user and void the warranty.
CAUTION:
Never open the housing of the appliance. This can result in
electric shock.
Never push the food into the feeding tube with your fingers. Al-
ways use the feedstick for this purpose. Risk of injuries!
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.
26 von 80
Copyright UNOLD AG | www.unold.de
Stand 10.3.2020