Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Step 4:
A. Flip the Mattress Support (F) so the "This Side Up" label is facing up. If the label is missing, the correct
orientation is with the springs at the top of the frame.
B. With a helper to hold it at the right height, align the 4 Small Screws (I) on the Mattress Support (F) with the holes
on the crib sides and tighten with the Allen Wrench (N). There are three possible height positions. The support
should start at the high position for newborns, then be moved lower as the child grows and becomes more mobile.
Once the child is able to pull up to a standing position, the support must be set to its lowest position.
High Position
Middle Position
Low Position
I - Small Screw
(both sides)
F - Mattress Support
Label reading "This Side Up"
should be facing up
888.226.4469 | 7
Tabla de contenido
