Specification - ROBBE Compact 6S EQ Duo Power Manual De Uso

STOP / ENTER BUTTON
• Pressing the 'STOP' button halts any process currently running, e.g. CHARGE.
• Pressing the 'ENTER' button confirms a selection, e.g. activation of a selected menu.
DATA-VIEW BUTTON
• Displays charger data, e.g. input voltage. This button is also used to view all the indi-
vidual cell voltages of a LiPo battery connected to the charger.
All buttons feature an auto-repeat function, i.e. holding the button pressed in has the
same effect as pressing the button repeatedly.
INTEGRATED SOUNDER
• The piezo sounder emits a beep to confirm each button-press. It also provides an
audible indication that the charge or discharge process has been concluded, and a
warning that an error has occurred.
4.

SPECIFICATION

Operating voltage:
Cell count:
Charge current:
Discharge current:
Equalizing current:
Charge power:
Discharge power:
Trickle charge:
Final discharge voltage:
Charge termination:
NC / NiMH:
Lead-acid and Lithium:
Dimensions:
Functions:
Operating instructions
Compact 6S EQ Duo Power
12 V DC (car battery) / 230 V AC mains PSU
(do not use a car battery charger!)
1 ... 14 NC / NiMH cells,
1 ... 6 Li-Ion (3.6 V), LiPo (3.7), LiFe (3.3 V) cells,
1 ... 6 (2 - 12 V) lead-acid cells
0.1 ... 5 A, max. 50 W
0.1 ... 1 A, max. 5 W
ca. 300mA
50 W, current is regulated accordingly
e.g. 24 V battery voltage, charge current approx. 2.0 A
e.g. 28 V battery voltage, charge current approx. 1.7 A
5 W, current is regulated accordingly
Charged-in capacity < 1 Ah: no trickle charge
Charged-in capacity > 1 Ah: trickle charge at C/20
(NC and NiMH batteries only)
0.8 V per cell, NC and NiMH
3 V per cell, LiPo, LiIo
2.5 V per cell, LiFe
1.8 V per cell, Lead-acid
Automatic, digital Delta Peak method
Automatic, voltage-dependent, CC-CV process
140 x 100 x 55 mm
Charge, discharge, discharge - charge, balancing
10 intenal memories
7
Order No.
8506