Crivit 310831 Instrucciones De Uso página 13

Máscara de esnórquel
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Symbols used
Total-view-panorama lens –
Extra large field of view
Easy-fit – Easily adjustable headband
100% UV-protection –
The lens absorbs 100% of
damaging UV-rays
Dry-top protects from splashes
entering the snorkel
High-quality elastic plastic with
Silicone
high resistance to water and heat
For use by persons with high
lung capacity
Warning: Only for use on the surface
of the water!
Warning: Not for use while diving!
General purpose
The product serves as a vision aid while snorkel-
ling and protects your eyes from direct contact
with the water.
Size selection
S/M
L/XL
Measure the distance from your eyes to your
chin and select the size of the product accor-
dingly.
Attaching the snorkel
(figure A)
Attach the snorkel to the frame of the mask until it
clicks firmly into place.
Removing the snorkel
Press the button on the frame of the mask and
pull the snorkel off.
Putting on the snorkel mask
(figure B)
• Loosen both ends of the headband. Hold the
• Use the other hand to carefully guide the
Removing the water
If water does enter the product, despite splash
protection, then you can remove it from the mask
by blowing briefly but forcefully out of the purge
valve.
Removing the snorkel mask
Loosen both ends of the headband. Pull the
headband carefully off the back of your head
and over your forehead.
Correcting defects of vision
If you would like to reduce a defect of vision with
stick-on lenses, please obtain this information
from your specialist retailer or optician.
10 – 12cm
Cleaning, care, storage
• Remove the snorkel from the mask body and
12 – 13cm
• Always store the product in clean and dry
• Never clean the product with aggressive
snorkel mask in front of your face with one
hand.
headband behind the back of your head.
Pull evenly on both ends of the headband
until the mask fits tightly and comfortably.
Please ensure that the snorkel mask forms an
airtight seal and no water can penetrate.
clean both parts with fresh water after each
use. Then leave both to dry completely.
conditions at room temperature.
cleaning agents, just wipe it clean using a
dry cleaning cloth.
GB/MT
13
Tabla de contenido
loading

Tabla de contenido