Cal-Van Tools Amp Hound Manual Del Usuario página 6

Amp Hound™ • Instructions
AMPERAGE MEASUREMENT
Note the size and amperage value of the fuse in the circuit to be measured.
Refer to vehicle specifications to verify that this fuse is the correct size and amper-
age value for the circuit.
Use the FUSE TYPE button to scroll to the type
of fuse (Mini, Std, or Maxi)
Use the FUSE VALUE button to scroll to the
amperage value of the fuse.
If the Fuse Hound does not list your exact
"Fuse Value", Simply enter the value closest to
the fuse you are measuring. The accuracy in
this case won't be quite as good but it will be
more than sufficient for most troubleshooting
operations.
To accept these settings, press and hold either
the FUSE TYPE or FUSE VALUE button until
the tool beeps twice and the display is blank.
Touch the probe tips to the fuse terminals and
read the amperage value on the display.
The display will alternate between the actual
current reading and the fuse values that were
selected. This helps to ensure that the fuse
values that were selected match the actual
fuse being tested.
A display reading of "OL" means that the circuit
amperage is greater than the Amp Hound rated
capacity.
Page 6