Tabla de contenido
Manual Buttonhole (Option)
1
Stitch selector:
Stitch width:
2
Stitch length:
3
4
Needle thread tension:
Presser foot B:
5
• To sew
If the diameter of the button is more than 1.0˝ (2.5 cm), a
buttonhole must be made manually as follows:
Turn the handwheel toward you to raise the needle to
1
its highest position. Raise the presser foot.
2
Set the stitch at " " by turning the stitch selector.
3
Attach the buttonhole foot [B].
Pull the buttonhole lever downward as far as it will go.
4
5
Lower the needle into the garment where the buttonhole
is to start, and lower the foot.
Sew the front bartack and left row, then stop.
6
7
Click the buttonhole lever toward you.
Sew the back bartack and right row, then stop the
8
machine at the starting point.
To cut the opening and to reset for sewing the next
buttonhole, refer to instructions
page 80.
(BH)
3 to 5
0.25 to 1.0
2 to 6
Buttonhole foot
and
on
4
5
1
4
5
4
3
1
2
3
4
5
6
7
8
82
2
3
5
Tabla de contenido
