Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Introduction
The information contained in this Quick Start Guide is sufficient for proper installation of E Series amplifiers, and for configuration of
settings in typical applications. Please refer to the full Operation Manual for detailed information on maintenance, cooling requirements,
warranty, and configuration for complex installations .
Important safety instructions
1.
Read these instructions.
2.
Keep these instructions
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
15. WARNING: To reduce the risk of fire of electric shock, do not expose
this apparatus to rain or moisture.
16. Do not expose this equipment to dripping or splashing and ensure
that no objects filled with liquids, such as vases, are placed on the
equipment.
17. Do not connect the unit's output to any other voltage source, such
as battery, mains source, or power supply, regardless of whether
the unit is turned on or off.
18. Do not remove the top (or bottom) cover. Removal of the cover will
expose hazardous voltages. There are no user serviceable parts
inside and removal may void the warranty.
19. An experienced user shall always supervise this professional audio
equipment, especially if inexperienced adults or minors are using
the equipment.
Standards
This equipment conforms to the requirements
of the EMC Directive 2004/108/EC and the
requirements of the Low Voltage Directive
2006/95/EC.
Standards applied: EMC Emission
EN55103-1, E3
EMC Immunity EN55103-2, E3, with S/N
below 1% at normal operation level.
Electrical Safety EN60065, Class I
This equipment is tested and listed according
to the U.S. safety standard ANSI/ UL 60065
and Canadian safety standard CSA C22.2
NO. 60065. UL made the tests and they
are a Nationally Recognized Testing
Laboratory (NRTL).
Explanation of graphic symbols
The lightning bolt triangle is used to
alert the user to the presence of
un-insulated "dangerous voltages"
within the unit's chassis that may be
of sufficient magnitude to constitute a
risk of electric shock to humans.
The exclamation point triangle is used to
alert the user to presence of important
operating and service instructions in the
literature accompanying the product.
To prevent electric shock do not remove top or bottom covers. No
user serviceable parts inside. Refer servicing to qualified service
personnel.
Français: à prévenir le choc électrique n'enlevez pas les couvercles.
Il n'y a pas des parties serviceable à l'intérieur. Tous reparations doit
etre faire par personnel qualifié seulment.
To completely disconnect this equipment from the AC mains,
disconnect the power supply cord plug from the ac receptacle. The
mains plug of the power supply cord shall remain readily operable.
Français:
Pour
démonter
l'alimentation générale, démonter le câble d'alimentation de son
réceptacle. La prise d'alimentation restera aisément fonctionnelle.
4
complètement
l'équipement
de
Tabla de contenido
