Use Operational Procedures - AERMEC PGD1 Manual De Uso

To manage or modify the operational parameters of the NXW units, the control panel interface on the machine must be used.
The fundamental operations that the user must be able to perform for correct use of the unit are the following:
(1) Pass from one menu to another;
(2) Select and modify a parameter;
1
Pass from one menu to another
(a) In order to scroll the various menus (the order with
which the menus are displayed is represented in the previ-
ous page) it is first necessary to enter the menu selection
mode by pressing the (
Prg
(b) Once the menu selection mode has been entered, scroll
these using the arrow keys: the ( ) key to pass to the pre-
vious menu and the ( ) key to pass to the next menu;
(c) When the desired menu is displayed, press the ( ) key
to enter the menu. To exit the menu and go back to the
menu selection mode, press the (
Exit menu
!

Use operational procedures

) key;
next
menu
next
menu
) key;
Esc
Enter
a menu
2
Selecting and modifying a parameter
(a) Once the selected menu has been entered (following
the procedure ) it is possible to scroll the windows
1
that make it up using the arrow keys, using the ( ) key to
pass to the previous parameter and the ( ) key to pass to
the next parameter;
(c) When the desired parameter is displayed, press the (
) key to enter the parameter. To exit the parameter and
go back to the parameter selection mode, press the (
) key;
ATTENTION:
Once a parameter has been selected, by pressing the (
) key, automatically enter the modification mode of that
parameter. From this mode it is possible to set the desired
values for the parameters, following the procedure below:
(1) pressing the ( ) key, a flashing cursor will appear near
to the first field of the parameter that can be modified (if
fields that can be modified are not displayed, no cursor will
appear);
(2) pressing the ( ) key or the ( ) key, the value of the
field will increase or decrease;
(3) by pressing the ( ) key, the modifications to the field
value will be confirmed, saving it in the memory;
On the basis of the type of parameter selected, the
number of fields that can be modified may vary;
Exit from a
parameter
parameter
menu
parameter
menu
Esc
Enter a
parameter
5