Manuales relacionados para CAMBRIDGE Fully Assembled
Resumen de contenidos para CAMBRIDGE Fully Assembled
- Página 1 Cambridge Fully Assembled Outdoor Fireplace Instruction Manual Cambridge Montado Completamente Manual de Instrucciones Chimenea al Aire Libre...
- Página 2 Cambridge Fully Assembled Outdoor Fireplace Layer Reference Guide: Guía de Referencia: Fireplace Dimensions: 59 7/8” Long 55 7/8” Deep 101 1/2” High Fireplace Weights: 7507 lbs. Each Chimenea de dimensiones: 59 7/8” Largo 55 7/8” Profundo 101 1/2 Alto Pesos Chimenea: 7507 lbs.
- Página 3 Cambridge Fully Assembled Outdoor Fireplace Layer Reference Guide: Guía de Referencia: Optional Woodbox Woodboxes Opcionales Woodbox Dimensions: Leñera Dimensiones: 34” Long 34” Largo 36” Deep 36” Profundo 38 1/2” High 38 1/2 Alto Woodbox Weights: Leñera Pesos : 1950 lbs. Each...
- Página 4 Cambridge Fully Assembled Outdoor Fireplace Tools Required for Fireplace Kit Installation: Items Included in the Fireplace Kit: Skid steer loader or other type of machinery with 1 - Fireplace unit top 1 - Fireplace unit bottom forks capable of lifting 4000 lbs.
- Página 5 ¾” Piedra limpia (aprox 1 tonelada) Sabotaje (manual o mecánica) Hormigon (aprox. 32-bolsas de 80 libras) Carretilla Cambridge concretas adhesive aprox. 6 (29oz) o Nivel (2’ y 6’ recomendado) 17 (10.3 oz). Tubos Velocidad de la Plaza (4 piezas) de 2”x 4” x 8”de madera Pistola para calafatear 10 oz o 28 oz (depende de qué...
- Página 6 Cambridge Fully Assembled Outdoor Fireplace Fireplace Concrete Pad Construction: Call 811 for information on underground utility marking. Select desired location and excavate 64” L x 58” W x 12” D area for concrete pad. Fill excavated area with approximately 6” of ¾”...
- Página 7 Cambridge Fully Assembled Outdoor Fireplace Fireplace Concrete Pad Detail-Drawing A - ½” steel reinforcing rod / Barra de refuerzo de acero B - 8” concrete slab / Bloque de cemento de 8” C - 2” x 8” Forms / 2” x 8” Formas D - Grade: 2 3/8 below finished paver height / Grado: 2 3/8 "altura por debajo del pavimento aca-...
- Página 8 Cambridge Fully Assembled Outdoor Fireplace Pre-Made Fireplace With Wood Boxes Concrete Pad Detail-Cross Section Drawing: Concreta del Cojín de la Chimenea Detail-Dibujo Seccionado Transversalmente: A - ½” steel reinforcing rod / Barra de refuerzo de acero B - 8” concrete slab / Bloque de cemento de 8”...
- Página 9 Cambridge Fully Assembled Outdoor Fireplace Included In The Kit: Fireplace Top Fork Protectors Fireplace Bottom (OPTIONAL) (OPTIONAL) Woodbox Woodbox Left Right Fork Protectors Fork Protectors Fireplace Hearth Filler Block Fork protectors are for installation purposes only. They will need to be removed before the filler blocks are installed.
- Página 10 Cambridge Fully Assembled Outdoor Fireplace FILLER BLOCKS 4” 4” 8” There are (8) filler blocks included in this kit. They are used on the top front and back, the bottom back of the Do not put the filler blocks in the fork pocket on the bottom unit unit, and the hearth.
- Página 11 Cambridge Fully Assembled Outdoor Fireplace Fully Assembled Outdoor Fireplace : Step 1 Paso 1: Step 1: Cuidadosamente levantar la parte inferior de la chi- Carefully lift the Fireplace bottom with a capable menea con una máquina y centra lo en el base con- machine and place centered on the cured concrete creto curado.
- Página 12 Cambridge Fully Assembled Outdoor Fireplace Fully Assembled Outdoor Fireplace : Step 2 Offset mark: The unit is shipped pre-marked, for placement front to back. Offset Markt: La unidad es enviado y marcado para co- locación de frente hay atrás .
- Página 13 Cambridge Fully Assembled Outdoor Fireplace Fully Assembled Outdoor Fireplace : Step 3 Should you want to move the unit in the future DO NOT GLUE the filler blocks in place. Fork protectors Fork protectors Paso 3: Step 3: Levantar y colocar cuidadosamente la parte superior de...
- Página 14 Cambridge Fully Assembled Outdoor Fireplace Fully Assembled Outdoor Fireplace : Step 4 Paso 4: Step 4: El siguiente paso es aplique adhesivo concreta e insta- Do not put the filler blocks in place. The hearth lar los bloques de relleno en los bolsillos de la horqui- will cover the opening on the bottom of the fire- lla, antes de instalar la chimenea.
- Página 15 Cambridge Fully Assembled Outdoor Fireplace Fully Assembled Outdoor Fireplace : Step 5 Optional The wood box bullnose should be flush with the front of the fireplace. Step 5 Optional: Paso 5 opcional: Carefully move the optional woodboxes next to Cuidadosamente pon los cajas para la lena que the fireplace bottom unit.
- Página 16 Cambridge Fully Assembled Outdoor Fireplace Fully Assembled Outdoor Fireplace : Step 6 Paso 6: Step 6: Cuidadosamente traer el hogar de la chimenea alre- Carefully bring the fireplace hearth about 6”-8” dedor de 6 "-8" lejos de la parte inferior de la chi- away from the fireplace bottom.
- Página 17 Cambridge Fully Assembled Outdoor Fireplace Fully Assembled Outdoor Fireplace : Step 7 Remove these 2 screws to drop the flue. Step 7: Paso 7: Remove the two screws on top of the chimney Retire los dos tornillos en la parte superior de la termination cap to drop the flue.
- Página 18 Cambridge Fully Assembled Outdoor Fireplace Fully Assembled Outdoor Fireplace : Step 8 Filler Block Filler Block Filler Block Paso 8: Step 8: El último paso es aplique adhesivo concreta e instalar The last step is to apply concrete adhesive, and install the filler blocks in the fork pockets.