Safety Instructions - Zibro H610 Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22

SAFETY INSTRUCTIONS

Install the device only when it complies with local regulations, by-laws and standards. The
unit is only suitable for use in dry locations, indoors. Check the mains voltage and
frequency. Connection voltage is 230 V. / 50 Hz.
GENERAL
Ensure that all windows are closed in order to achieve maximum efficiency.
The capacity of the humidifier depends on the temperature and the humidity in the room.
Ensure that the air inlet is kept clean. This prevents unnecessary power consumption
and guarantees optimum efficiency.
If the ON/OFF button is pushed for the second time, the humidifier will stop 1 minute
later in order to cool down the unit.
IMPORTANT
• The plug must always be easily accessible when the unit is connected. Read
these instructions carefully and follow the instructions.
Before connecting the unit, check the following:
The voltage supply must correspond with the mains voltage stated on the rating
label.
The socket and power supply must be suitable for the current stated on the rating
label.
The plug on the cable of the device must fit into the wall socket.
The device must be placed on a flat and stable surface.
The electricity supply to the device must be checked by a recognised professional if you
have any doubts regarding the compatibility.
This device is manufactured according to CE safety standards. Nevertheless, you must
take care, as with any other electrical device.
Do not cover the air inlet and outlet ports.
Empty the water reservoir before moving the unit.
The water in the container should be refreshed every day.
The inside of the water container should be kept clean.
Do not turn the device upside down if water is in the container.
Never allow the device to come into contact with chemicals.
Never spray the unit with or submerge in water
Do not insert objects into the openings of the unit.
Always remove the plug from the electric power supply before cleaning or replacing
the unit or components of the unit.
Never use an extension cable to connect the device to the electric power supply. If
there is no suitable, earthed wall socket available, have one installed by a recognised
electrician.
For safety reasons take care when children are in the surrounding of the device, as
4
44
Tabla de contenido
loading

Tabla de contenido