BabyGo FreeMove Instrucciones De Montaje página 17

BabyGO
User Instructions:
Adjustment of harness straps
Check the harness straps height; it must fit your child's height. If not, please adjust harness straps
height.
1. Press the harness adjuster lever with one hand, then pull the shoulder belt harness forward
using the other hand to loosen it (fig.1).
2. Remove the shoulder belt harness from the metal yoke on the back of the restrain system
(fig. 2).
3. From the back of the restraint, pull the shoulder belt harness out of the harness slot, then
push through the desired slot according to the height of your child (fig. 3/4).
4. At the back of the restraint, re-attach the shoulder belt harness onto the metal harness yoke
(fig. 5).
5. Pulling the end of the harness adjust the strap towards you to tighten the shoulder belt har-
ness (fig. 6).
Use different installing modes for different
groups
Group I (for children 9 – 18 kg)
Place the child car seat on a vehicle seat wit-
hout any inclination, ensuring that its backrest
is firmly placed against the vehicle seat (fig.1).
HINWEISE:
a. Before placing the restraint, please make
sure that the vehicle seat back is fully up-
right.
b. The harness strap cannot be twisted.
c. The restraint backrest must be placed firmly
against the vehicle seat, without any gap.
ASSEMBLY INSTRUCTION
Motion | Sportline
FreeMove | GoSafe
BabyGO • www.babygo.eu
17