nedis BTTC200BK Manual De Instrucciones página 8

Switching the product on/off
1. Press and hold A
4
The product automatically switches off when it is not paired within 10
minutes.
Receiver mode (image C)
Option 1: Using an AUX connection
1. Set the AUX / SPDIF switch A
2. Set the mode switch A
3. Plug the 3.5 mm to 3.5 mm audio cable B
4. Plug the other end of B
4
You can also connect an audio device with the stereo audio cable 2x RCA
male to 3.5 mm female B
Option 2: Using an SPDIF connection.
1. Set the AUX / SPDIF switch A
2. Set the mode switch A
3. Plug the SPDIF optical cable B
4. Plug the other end of B
5. Switch on the product.
4
Press and hold A
2
Press and hold A
4 6
A
Blinks blue.
6. Enable Bluetooth on the device you want to pair.
7. Press Bluetooth button A
8. Select "BTTC200BK" from the list of available Bluetooth devices on your
device.
4
If asked, enter the pairing code '0000' .
6
4 A
blinks slowly to indicate pairing is successful.
3
for 3 seconds to switch the product on or off.
1
to AUX.
7 to RX.
r
into the audio output device.
e
.
1
to SPDIF.
7
to RX.
y
y
into the audio output device.
to turn the volume up.
to turn the volume down.
5
to start pairing.
r
into the AUX A
into the SPDIF output (Rx) A
8
8
.
q
.