Intended Use; Indications For Use - Ottobock 17LA3N Instrucciones De Uso

Item Component
6 Axial washers (set)
7 Countersunk head screw
8 Bearing ball
9 Spring guide housing
10 Compression spring set / com­
pression spring

3 Intended use

3.1 Indications for use

The system ankle joints are exclusively intended to be used for the patient's
orthotic fitting of the lower limbs.
In case of unilateral use, the manufacturer recommends that the system
ankle joint be processed by means of lamination resin technique or carbon
prepreg technology. When used bilaterally, there is no limitation on the pro­
cessing technology used.
3.2 Indications
Partial or total paralysis of the leg muscles.
Indications must be determined by the physician.
Reference no. for spare part
17LA32N=16 (size 16)
17LA32N=20 (size 20)
17LA33N=10 (size 10)
17LA33N=12 (size 12)
17LA33N=14 (size 14)
17LA33N=16 (size 16)
17LA33N=20 (size 20)
501S137=M4x8 (size 10, 12)
501S137=M4x10-2 (size 14)
501S137=M5x10-1 (size 16, 20
509Y1=5.0 (size 10, 12)
509Y1=7.0 (size 14)
509Y1=9.0 (size 16, 20)
30Y345=12 (size 10, 12)
30Y345=14 (size 14)
30Y345=20 (size 16, 20)
513D87=0.75x2.95x2 (size 10, 12)
513D87=1.1x4.8x2.8 (size 14)
30Y254=16-1 (size 16)
30Y254=20-1 (size 20)
11