Amate Audio KEY Serie Manual De Usuario página 12

KEY Active systems Sep 2018
To obtain a clear and free-distortion reproduction, it is advisable to place the mid-
high units on top of the low units keeping between them an approximate height of
two meters. If such height cannot be achieved nor maintained, it is advisable to use
the classical tripod for each mid-high cabinet and leave the low units on the floor.
WARNING!!! For installations that suffer from acoustic problems and in which it is
necessary to reinforce the response in the low frequencies, it is advisable to group
all the subwoofers together in the same point. By this way, cancellations will be
avoided and a higher acoustic pressure level will be obtained.
3.5. Stage monitor use
The KEY10A, KEY12A, KEY15A and
KEY15NA models have trapezoidal
shape so, they can be used as floor
monitors without extra accessories.
Use [MONITOR] preset.
Fig.7. Stage monitor use
3.6. Rotatable logo
KEY10A, KEY12A, KEY15A and KEY15NA model logos can be rotated.
3.7 Flying
Only experienced people should fly speaker cabinets. Extreme care should be taken
to assure the load bearing capabilities of the structures where the cabinets will be
placed. Hanging hardware (as chains, eyebolts, lock pins...) should be regularly
inspected and replaced if in doubt. WARNING!!! DO NOT SUSPEND THE
CABINETS FROM THE HANDLES!!!!
3.7.1. KEY10A, KEY12A, KEY15A and KEY15NA horizontal flying with "U-BL"
bracket
The UB-L is an optional accessory for wall mounting (horizontal orientation). Please,
refer to "UB-L user's manual" to get more information.
Fig.8. UB-L wall-stand
12
Amate Audio