Qlima WDZ 510 Instrucciones De Uso página 30

Ocultar thumbs Ver también para WDZ 510:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
2. INSTALLATION
See P1, P2 on page 1:
• T ake out the appliance and accessories from the packing box, check the accessories and
whether the appliance enclosure is well-found or not. (picture 1 and 2).
• C lick the wheels in the dedicated holes (see P6)
• P ush the flexible hose in the air inlet opening (see P7a) and turn clock-wise to lock the
hose.
• I nsert the other end (= the handle) of the flexible hose into the rigid tube see P7b.
• D epending on required job: choose the correct accessory and connect the rigid tube and
the accessory together.
• C revice nozzle (Picture 4a): ideal for narrow spaces
• R ound Brush (picture 4b) : ideal for cleaning furniture or counter top
• F loor brush (Picture 3a and 3b): ideal for cleaning the floor
• L oosen the lock and take the top cover 7 from the container barrel 1.
FOR VACUUMING DRY DUST:
• A ttach the filter (WDZ510: item A / WDZ520 item A / WDZ530 item A+B)
• P 8: shows how to mount the non woven filter (A)
• P 9: shows the compartment where the HEPA filter (B) or Sponge filter (C) is to be
mounted
• P 10: shows how the HEPA filter (B) is mounted
IMPORTANT:
ALWAYS mount the filters as per this instruction. NOT mounting the filters when suctioning
(even for a very short period) will cause dust and other particles to enter the motor area of
your vacuum cleaner. This will cause almost immediate loss of suction power, this damage
is unrepairable damage which is NOT covered by the warranty!
Big amounts of dust sometimes can cause the filter to be blocked completely and all
suction power will be lost. In this case:
1. Unmount the filters
2. Clean the filter (outdoors!) by tapping the rigid parts carefully to a rigid surface
3. Mount the filters again
4. I f step 1 to 3 do not help: the filters need replacement – check for replacement parts at
your local store.
FOR VACUUMING LIQUIDS:
• M ount the sponge filter "C" to the compartment as shown in P9.
• P 9: shows the compartment where the HEPA filter (B) or Sponge filter (C) is to be
mounted
should only be mounted when vacuuming dry dust!
ALL MODELS:
• Mount the top cover 7.
• Close the locks
4
30
Do NOT mount the non woven filter (A) nor the HEPA filter (B). Filters A and B
Tabla de contenido
loading

Este manual también es adecuado para:

Wdz 520Wdz 530

Tabla de contenido