Tool Specific Safety Information; Greenlee Contact Information - Greenlee ESG105LXR Manual De Instrucciones

Tool Specific Safety Information

• Use the correct tool, accessories, etc. for your
application. The correct tool will do the job better
and safer at the rate for which it was designed.
Use of the tool for operations different from those
intended can result in a hazardous situation. Keep
this manual with the tool in the space provided in
carrying case.
• Before operating this tool, read and understand:
• This operation manual
• The battery/charger manual
• The instructions and warnings for any other
equipment or material used with this tool
• Markings on the tool
• Required work-site safety procedures
• Follow all appropriate and required work
procedures and wear all required PPE when on
jobsite working near energized electrical lines.
If you are not trained and familiar with appropriate
jobsite and PPE requirements do not use this tool.
• This tool is not insulated. When using this unit
near energized electrical lines, use proper personal
protective equipment.
• Do not use on live electrical lines. This reduces
the risk of electrical shock and arc flash.
• During remote usage of this tool, remain outside
of the arc flash boundary in accordance with
NFPA 70E for the conductor being cut to reduce
the risk of severe injury.
• Do not cut cable under tension. Cable can whip
and strike when cut and result in severe injury
or death.
• Large forces are generated during use that can
break or throw parts and cause injury. Keep all
unnecessary personnel away from work area and
wear appropriate PPE.
6
• Do not modify tool. Modifying the tool in any
manner may result in personal injury and voidance
of the tool's warranty. A head that has been welded,
ground, drilled or modified in any manner can break
during use. To reduce risk of injury, replace the
whole damaged head never individual components.
Discard damaged heads using proper disposal
methods.
• Keep your fingers and hands away from the tool
head during the operating cycle. Your fingers or
hands can be crushed, fractured or amputated if
they become caught in the tool head or between
the tool head and other objects.
• Remove battery before interacting with the
cutting head.
• One person must control work process and
machine operation. Only the operator should be in
the area when the tool is running.

Greenlee Contact Information

If you have any questions, need to arange service or
purchase parts or accessories for this Greenlee product:
Contact your local Greenlee distributor or Greenlee's
Customer Service Center.
Additional copies of this manual are available for
download at www.greenlee.com
Greenlee Customer Service
USA: 1-800-435-0786 | Canada: 800-435-0786
International: 1-815-397-7070
[email protected]
Shipping address:
Greenlee Factory Service Center
4411 Boeing Dr., Rockford, IL 61109
© 2020 Greenlee Tools, Inc.
Remote Cable Cutter
52087760 REV 0