Dynasty DOBQ3000A Manual De Usuario página 16

Installing Access Doors
Models DADA-18, DADA-30 and DADA-42
1. Provide cut out and doorjamb with inside dimensions as
follows: 19 3/8" X 16 1/4" for DADA-18, 19 3/8" X 28
1/4" for DADA-30, and 19 3/8" X 40 1/4" for DADA-42
2. Check fitting of frame against cutout. Mark location of
rivet nuts.
3. Secure the steel frame with 16 screws of type #10 X
3/4 truss head phillips S/S.
4. Attach doors to frame. (See figure 2)
FIG A
HEIGHT ADJUSTMENT
FIG B
SECURE
MOUNTING PLATE
5. Adjust doors as follows:
a) For height adjustment, loosen the two screws
attached to each mounting plate. (See figure A)
b) Snap off hinge and secure mounting plate with
#6 X 1 flat phillips S/S. (See figure B).
c) For side adjustment turn screw to increase or
decrease door overlay. (See figure C)
d) For depth adjustment, loosen screw, adjust door to
desired position and retighten screw. (See figure D)
FIG C
SIDE ADJUSTMENT
installation
FIG D
DEPTH
ADJUSTMENT
15